EasyManuals Logo

onga Whispair Series User Manual

onga Whispair Series
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
IMPORTANT!
The operator must be provided with this owner’s manual. This must be read before
operation and followed during operation.
These instructions are a guide only. Users not familiar with spa equipment should
seek advice from people with experience in spa equipment and installation.
Technical Data - Model: Whispair 120 & WhispairPlus 120
Outlet:
Designed to suit 40mmNB PVC pipe in accordance with AS/NZS 1477: 1999 -
PVC Pipes and Fittings for Pressure Applications.
AND
ISO 727: 1985(E) - Fittings of Unplasticized Polyvinyl Chloride (PVC-U),
Chlorinated Polyvinyl Chloride (PVC-C) or Acrylonitrile / Butadiene / Styrene
(ABS) with Plain Sockets for Pipes Under Pressure - The outlet socket has
been designed to suit the 50mm nominal O.D. pipe in this standard.
Minimum Ventilation Area 50 sq. cm (free space around
Blower) in accordance with
AS/NZS 2023:1995
Maximum Ambient Temperature 55
0
C
Electrical Approval Approved in accordance with AS/
NZ3136:2001
IP Rating IPX5 to AS/NZS 3350:2:60
Mounting Maximum 6mm fastner x 2 (not
supplied, refer installation section for
mounting positions).
Installation Zoning For domestic applications in
accordance with Zone 1
AS/NZS 3000:2000
Minimum no. of air jets 9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the onga Whispair Series and is the answer not in the manual?

onga Whispair Series Specifications

General IconGeneral
Brandonga
ModelWhispair Series
CategoryBlower
LanguageEnglish