En-
45
Using the Timers
—Continued
Once a timer has been programmed, you can turn it on or
off as necessary. For example, while you’re on holiday,
you may want to turn off the timer you use as an early-
morning alarm.
Turning Timers On and Off
1
Press the [TIMER] button repeat-
edly to select timer 1, 2, 3, or 4.
2
Use the Previous and Next [ ]/
[] buttons to select Timer On or
Timer Off.
When a timer is turned on, its number
appears on the display.
After a few moments, the previous dis-
play reappears.
ENTER
TIMER
MENU/NO
/
or
Checking Timer Settings
1
Press the [TIMER] button repeat-
edly to select timer 1, 2, 3, or 4, and
then press [ENTER].
2
Press [ENTER] repeatedly to see
all of the timer’s settings.
Notes:
•You can change the settings by using
the Previous and Next [ ]/[ ]
buttons.
• If you change the settings of a timer
that is off, that timer will be turned on.
•To return to the previous display at any
point in this procedure, press the
[MENU/NO] button.
CBX-300EnFrEs.book Page 45 Friday, September 14, 2007 9:26 AM
To Next Page
Loading...
