18
Specifications
Frequency response ..................10 Hz – 80 kHz (when using LINE IN)
Distortion ..........................................................0.004%
(32 Ω, 1 kHz, 100 mW + 100 mW output, JEITA)
Supported headphone impedance ...............................8–600 Ω
Maximum input (LINE IN) ...........................................2 Vrms
Effective maximum headphone output
170 mW + 170 mW (32 Ω, 1 kHz, 10%, JEITA)
80 mW + 80 mW (300 Ω, 1 kHz, 10%, JEITA)
40 mW + 40 mW (600 Ω, 1 kHz, 10%, JEITA)
Operating temperature ........................................ 0°C to 35°C
Continuous battery operation time
(when load is 32 Ω, output is 1 mW + 1 mW and PWR MODE=LOW)
Apple iOS device ...........................................About 7 hours
o The operation time when using batteries will differ depending on use
and other conditions.
Charging time ..................................About 9 hours (using USB)
About 4 hours (using PS-P515U with DC input)
External dimensions .........69.6 × 123 × 21.5 mm (2 3/4” × 4 7/8” × 7/8”)
(W × D × H, not including protrusions)
Weight ...................................................... 280 g (5/8 lb)
Supported sampling frequency/bit depth. . . . . . . PCM: up to 192 kHz/24-bit
DSD: up to 5.6448 MHz/1-bit
Recommended AC adapter ............TASCAM/PS-P515U (sold separately)
Compatible media ...........................microSD cards (64 MB – 2 GB)
microSDHC cards (4 GB – 32 GB)
microSDXC cards (64 GB – 128 GB)
o Not all media are necessarily compatible with this unit.
Supported file systems ................................FAT16, FAT32, exFAT
o Design and specifications are subject to change without notice.
o Weight and dimensions are approximate.
o Illustrations may differ slightly from production models.
DAC-HA300_OM_vA_CS6.indb 18 2015/01/29 18:01:59
To Next Page
Loading...
