E
Plus Ten
Button
(+10)
Press this button to select or
program
a track
with
a track
number
oÍ
10
or
higher. For example, to
select Track
Number
30.
press
this button three
times, and then
press
0.
Fast
Forward Button
(
>)
)
When this button is held down, the
pickup
moves
forward
over
the disc.
Disc
play
is resumed
as
soon as this button
is released.
Fast
Reverse Button
(<<)
When
this button
is held down, the
pickup
moves backward
over
the disc.
Disc
play
is resumed as soon as this button
is
released.
Block
Repeat Button
(A
-
B)
Use this button to
repeat a specific section.
Press this button
to set the beginning of the block
repeat section and
press
again
to set the
end of the block
repeat
section.
To
stop the block
repeat,
press
this
button
one
more
time.
Block repeating
is
not
possible
during
memory
play
and
shuffle
play.
Repeat
Button
(REPEAT)
Press
this button to activate
the
repeat
play
mode. Repeat
play
can
be used
in
conjunction
with
the
normal,
memory
play
and
shuffle
play
modes.
Intro Play Button
(INTRO)
Press
this
button to enter the
"lNTRO"
play
mode.
The Intro
play
function
automatically
locates the beginnings of
the tracks
on a disc and
plays
about the
first seven seconds of each one.
It is
particularly
useful for
rapidly
checking
the contents of a
disc.
When
this button
is
pressed,
the
INTRO indicator lights
up.
Remote
Gontrol
Sensor
(REMOTE
SENSOR)
Commands from the
remote
control
transmitter are received
here.
Display Button
(DISPLAY)
Press this button during
playing
to switch the
display shown
in
the
Time Display
among the
following three types:
Operations
To
Load a
Disc
1. Elapsed time display
(SINGLE
LAP)
Shows
how long the current
track has been
playing.
2. Track
remaining
time
(SINGLE
REMA)
Shows
how much
time
is
left for
the track
currently
playing.
3.
Total remaining time
(TOTAL
REMA)
Shows
how
much
playing
time
is left for
the
entire disc.
During
memory
play,
this display
shows the
playing
time
remaining
for
the entire
sequence of
tracks
programmed
into
memory.
Time Display
This
display
shows either the elapsed
time or the
remaining
time
for
the track being
played
or the
remaining time
for
the
entire
disc.
During memory
play,
this display shows
either the
elapsed time
or the
remaining
time
Íor the track being
played
or the
remaining
time
for
the entire sequence
of tracks
in me-
mory.
lt
can be set by the
DISPLAY
buttonÍZl.
Track Number Display
Displays the total
number of tracks on the
disc,
or
the selected
track
number during the
program,
or the
number
of the
track
that
is
currently
being
played.
Indicators
A- B:
Lights
up
while
the
block
repeat
(A
-
B) mode
is set.
REPEAT:
Lights
up
when the
repeat
play
mode
is
set.
SHUFFLE:
Lights
up
when the shufÍle
play
mode is set.
INTRO:
Lights
up while the
"lNTRO"
play
mode
is
operating.
MEMORY:
Lights
up during
memory
play
or
when a se-
lection
is
programmed
into
the
memory.
PAUSE:
Lights
up
when the
pause
mode is
engaged.
Random Calendar
Display
The numbers
oÍ the
tracks being
played
back or the tracks
programmed
in
the
memory
are displayed
in the
playing
order.
*
Track numbers
above
2O are not displayed but
rather
are
represented by a bar
('-").
Press
the
POWER switch to turn on the
power.
Press the
OPEN/CLOSE
button to open the
Disc Tray.
Put
the disc
in
the
Disc Tray with its label
facing
up.
Press
the
OPEN/CLOSE
button again to
close the disc tray.
o
When the total number oÍ tracks on the
disc
and
its total
playing
time are displayed, the disc
is ready.
o
lf
nothing
is
displayed, this
may mean
thatthe disc
is in upside
down.
lf
that
is
the
case,
take out
the disc and
put
it in right
side up.
o
When
you put
the disc
in
the
disc tray, if
you
press
the PLAY
button
instead
of the OPEN/CLOSE button, the
tray
is
closed
automatically and the first track begins to
play.
E
E
E
m
E
@
m
@
@
B
@
e
E
@
OPEN/CLOSE
-6-
To Next Page
Loading...
