Need help?Do you have a question about the Onkyo EQ-201 and is the answer not in the manual?
General| Type | Stereo Graphic Equalizer |
|---|---|
| Total harmonic distortion | 0.008% |
| Signal to Noise Ratio | 110dB |
| Gain range | ± 12dB |
| Filter bands | 10 |
| Input Sensitivity | 150 mV |
| Output Level | 150mV |
| Power Consumption | 12W |
| Dimensions | 435 x 91 x 272mm |
Provides flexibility in adapting response to listening room and music type.
Red LEDs for each control to check response settings easily.
Shows combined left/right channel signal level per frequency band.
Shows unaltered signal level when equalization is off.
Instructions to reduce risk of fire, electric shock, and damage.
Covers operation instructions, water, heat, power sources, and servicing.
Information on recording serial and model numbers for warranty.
Guidance on cleaning the unit with soft cloths and mild detergent.
Turns the unit ON or OFF. Ensure EQ is off or amp is in source mode when powering down.
Adjust response for frequency ranges; center click-stop indicates 0 position.
Adjusts the indication level of the spectrum analyzer display.
Engages or disengages the equalization effect based on level controls.
Selects between tape deck playback or amplifier input for equalization.
Shows combined left/right channel signal levels in each frequency band.
How to equalize signals from amplifier or tape deck.
Steps for recording equalized or unequalized program sources.
Instructions for dubbing tapes between connected decks.
To Next Page
