Onkyo TX-NR616 - Safety Information and Introduction; Important Safety Instructions; General Safety Warnings

Firmware Update for the TX-NR515, TX-NR616, HT-RC460
& HT-R791 (HT-S7500)
!
We are pleased to offer this firmware update for the best possible performance of your AV Receiver.
To check FW version, press the home button on the remote control. Highlight “F/W Update” or Firmware Update
icon and press enter. FW version will be displayed on the front panel and TV.
A FIRMWARE UPDATE IS NOW AVAILABLE THROUGH THE NETWORK OR USB CONNECTIONS.
Latest Firmware Version: 1171-8110-0500
Information Concerning Firmware Update for Onkyo Network Receivers
Onkyo has discovered there is a possibility of failure when updating receivers to this new firmware
package via ethernet in certain network environments. For this reason, we are now only releasing a
firmware file for installation via USB port / flash memory device.
Users should first check to see if their network receiver is running the firmware (1130-9106-0300 or
1130-9106-0301 released August 10, 2012) before installing this update via USB. If your network
receiver is not running firmware version 1130-9106-0300 or 1130-9106-0301, please update your
receiver to this version via the network facility before proceeding further.
If your receiver is running more recent firmware, there is no need to update via network facility.
You can judge whether older or newer by the first three digits.
To check your firmware version, press the “Home” button on your remote control. Highlight “F/W
Update” or select the “Firmware Update” icon and press enter. Your current firmware version will be
displayed on the front panel of your A/V receiver as well as your TV screen.
Should you encounter any difficulties when performing this update, please
contact us.
We appreciate your understanding and apologize for any inconvenience this issue may cause.
The 8/18/2016 update will address the following:
1. Improves the playback of particular SiriusXM stations.
2. This particular firmware update is only available via USB installation.
!
F/#!31.#4.!0')1.#!*+(30)#4!133!'&*%&!0')1.#47!
The 10/18/2013 update will address the following: UPDATE AVAILABLE ONLY via USB (US ONLY)
1. Corrects lock up failure when using MiCasaVerde Vera Lite controller on the same network
The 8/28/2013 update will address the following: UPDATE AVAILABLE ONLY via USB
2. Improves picture output of 4K up-scaling;
3. Format change of Rhapsody is scheduled in the near future. To correspond this change, you should apply this
update.
The 4/13/2013 update will address the following: UPDATE AVAILABLE ONLY via USB
1. Improves the operation when HDMI Through is set to on
The 10/09/2012 update will address the following:
UPDATE AVAILABLE ONLY via USB
1. Improves problem of HDMI video output no longer working