Onkyo TX-RZ3100 - Control Function Settings

ControlFunctionSettings
Youcanenablethecontrolfunctionsbetweentheunitandexternaldevices.
Specialdevicesorcableconnectionsarenecessarytoenablethefunctions.For
moreinformationaboutinstallation,contactastorespecializingintheseproducts.
RS232port
Usethisportforconnectionwithanintegratedcontrolsystemthatcanenable
homeautomation.Someintegratedcontrolsystemsprovideacentralized
operationwithasingletouchpanelcontrollerinordertocontrolaudioandvideo
homeappliancesandsecuritydevicestogether.Formoreinformationabout
adoptinganintegratedcontrolsystem,contactthespecializedstores.
IRjack
Ifyouuseacommerciallyavailablemultiroomremotecontrolkitwiththisjack,you
canoperatetheunitwiththeremotecontrollerevenwhenyouareinaseparate
room,oroperatetheunitwiththeremotecontrollerevenifitsremotecontrol
sensorisdifficulttosee.
OthercompaniesmayuseindicationsotherthanIRontheirproducts.Confirm
intheinstructionmanualincludedwithyourcomponents.
RefertotheinstructionmanualoftheIRreceiverforthetypesofcables
requiredforconnection.
12Vtriggeroutputjack
Youcanenablepowerlinkoperationwhenyouconnecttheunitandanexternal
devicesuchaspoweramplifierequippedwith12Vtriggerinputjack.Whenthe
Settings