Onkyo TX-RZ3100 - AM;FM Radio Operations; Radio Tuning and Presets

AM/FMradio
TuningintoaRadioStation
TuningAutomatically
1. PressTUNERontheremotecontrollerseveraltimestoselecteither"AM"or
"FM".
2. PressMODEontheremotecontrollersothat"TunMode:Auto"appearsonthe
display.
3. Pressthecursors / ontheremotecontrollertostartautomatictuning.
Searchingautomaticallystopswhenastationisfound.Whentunedintoa
radiostation,the"TUNED"indicatoronthedisplaylights.Whentunedinto
anFMradiostation,the"FMST"indicatorlights.
Nosoundisoutputwhilethe"TUNED"indicatorisoff.
WhenFMbroadcastsreceptionispoor:
Radiowavesmaybeweakdependingonthebuildingstructureandenvironmental
conditions.Inthatcase,performtheprocedureasexplainedbelowin"Tuning
Manually"tomanuallyselectthedesiredstation.
TuningManually
1. PressTUNERontheremotecontrollerseveraltimestoselecteither"AM"or
"FM".
2. PressMODEontheremotecontrollersothat"TunMode:Manual"appearson
thedisplay.
3. Whilepressingthecursors / ontheremotecontroller,selectthedesired
radiostation.
Thefrequencychangesby1stepeachtimeyoupressthebutton.The
frequencychangescontinuouslyifthebuttonishelddownandstopswhen
thebuttonisreleased.Tunebylookingatthedisplay.
Toreturntotheautotuningmode:
PressMODEontheremotecontrolleragainsothat"TunMode:Auto"appearson
thedisplay.Theunittunesautomaticallyintoaradiostation.
Tuningtothefrequencydirectly
Itallowsyoutodirectlyenterthefrequencyoftheradiostationyouwanttolisten
to.
Playback Function