To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-RZ810 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 5 - 1000 Hz |
| Output impedance | 2300 Ω |
| Pre-out channels | 7.2 |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 10 % |
| Dynamic power per channel (3 Ohm) | 300 W |
| Dynamic power per channel (4 Ohm) | 250 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (1KHz@6 Ohm) | 180 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, Dolby Surround, Dolby TrueHD |
| PCM digital audio | 24-bit/192 kHz |
| Analog audio input | 7 |
| Center speaker impedance | 16 Ω |
| Apple docking compatibility | iPad, iPhone, iPod |
| AM band range | 522 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 80 |
| Optical drive included | No |
| Package weight | 17000 g |
| Package depth | 490 mm |
| Package width | 574 mm |
| Package height | 335 mm |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 710 W |
| THX-certified | THX Select2 |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
Weight and Dimensions| Depth | 395 mm |
|---|---|
| Width | 435 mm |
| Height | 201.5 mm |
| Weight | 14000 g |
Guides on selecting the correct speaker configuration for surround sound systems.
Instructions for connecting speaker cables to the receiver terminals.
Details on connecting the AV receiver to a TV using HDMI, including ARC.
Guide for connecting external audio/video devices like Blu-ray players.
Instructions for setting up audio/video playback in a separate room (Zone 2/3).
Connecting antennas, network cables, and power cords for basic functionality.
Guides for powering on the unit and completing the initial setup process.
Verifying that all input sources are connected correctly.
Configuring Wi-Fi or wired LAN connection for network features.
Details on HDMI setup, CEC, Standby Through, and Audio Return Channel.
Settings for enjoying audio/video in a separate room (Zone 2/3).
How to play AV components and adjust volume and listening modes.
Using Internet Radio, Music Server, and USB for audio playback.
Streaming music wirelessly via AirPlay and Bluetooth connections.
Tuning into AM/FM radio and controlling audio in separate rooms.
Adjusting bass, treble, and using quick menu for sound settings.
Identification and function of buttons and indicators on the front panel.
Explanation of the various indicators and information shown on the unit's display.
Details of all input/output jacks and terminals on the rear panel.
Explanation of each button and its function on the remote control.
