Onkyo TX-SV424 - Using Preset Radio Stations; Programming Radio Stations; Recalling Preset Stations; Cancelling Preset Stations

Using preset stations
GROUP
MEMORY 1~9, 0/10
CLEAR PRESET SCAN
SPEAKERS FMMUTE ® TUNED @ ~GROUP—
A VIDEO ON STEREO MEMORY A 1.
MEMORY : Select the frequency that you want to
©
[ba
foro
store
in
the
memory.
;
hod
|
Pri.
(See
Receiving
stations
on
page
16.)
2. Press the MEMORY button.
The MEMORY indicator will light for
8 seconds.
ew
Mute
»
tuneD«
—anour
3.
While
the
MEMORY
_
indicator
PON STEREO MEMORY lights, press the GROUP button to
choose the desired group.
The group shown on the display changes
in the following order each time the but-
ton is pressed: A > B > C >A.
e ennes 4. Select the desired memory number
viOEO
{JON
STEREO.
using
the
number
buttons.
Use the 0/10 number button to enter a 10.
@ Since ten AM or FM stations can be
stored in each group (A, B or C), a total of
30 stations can be stored in the memory.
1. Press the GROUP button to select the
desired group.
2-a. Input the memory number you wish
2-b to receive by using the number but-
tons.
2-b. Press the PRESET SCAN button.
PRESET SCAN eo4
— s Each station stored in the group cho-
sen in step | will be received for 5
seconds (for each station).
When the station that you want is
found, press the PRESET SCAN but-
ton again and scanning will stop.
Use Remote control
1. Press the GROUP button and choose
“¢ PRESET » 1 stat the group.
Z, Press the PRESET ( 4 or > ) button.
After the last number of GROUP C is
reached, scanning will restart at
GROUP A.
Select the station as explained in the
previous section.
2. Press the FM MUTE/MODE button
while holding down the MEMORY
button. “-— -” will be shown on the
channel display.
@ Once the preset station has been can-
celled, the memory location can be used
to store another station.
SPEAKERS FMMUTE ® TUNED 4 —GROUF—
A VIDEO ON STEREO B
{_ ha Pitt off] 8
Pod | Pied ¢L
MEMORY FM MUTE/-MODE
Posen?