Onkyo UWF-1

Auto Setup works only with a router that has
Automatic Security Setup (WPS).
Auto Setup
Select “Press button” and then press ENTER
Press Button
PIN Code
Auto Setup
Press Button
PIN Code
Auto Setup
Manual Setup
Auto Setup
Wireless Setup
Connect the UWF-1 to the USB port on your network-capable Onkyo
receiver; Press USB on the receiver’s faceplate to select USB input.
ENTER
Use your receiver’s remote control to navigate the display
menu choices.
Select “Auto Setup”
Press button or PIN code method
Your wireless LAN security settings will require one of these methods. Follow appropriate
directions below, depending on which method your wireless LAN security settings require.
Select “PIN Code” and then press ENTER
OK
OK
Press Button
PIN Code