8. Calibration
15
OnSky Health
Go to Settings on Health Display, Click on “Calibration”.
First Calibration: Click on “Empty Bed”. Follow the instructions.
Note: leave the bed empty without any person or pet. When you hear a beep,
it means the First Calibration is done.
Second Calibration: Click on “User Laying on Pillow”. Follow the instructions.
Lay down on pillow, breath normally, stay still, and do not talk. It will take
about 1 minute to finish. When you hear a beep, then the Second Calibration is
completed.
v1.2 October 2022 OnSky Health Copyright © 2022
To Next Page
Loading...