Need help?Do you have a question about the Onwa KAP-833 and is the answer not in the manual?
General| Brand | Onwa |
|---|---|
| Model | KAP-833 |
| Category | Autopilot System |
| Language | English |
Provides a brief list of the KAP-833 autopilot's capabilities and modes.
Describes the Standby mode where the autopilot is on but not steering.
Explains how to engage and disengage Auto mode for course holding.
Details how to manually control the rudder angle using the autopilot.
Explains how the autopilot can steer to a GPS-defined course.
Describes the function of the timer alarm for various timing needs.
Discusses the use and capabilities of remote steering stations.
Explains settings to customize autopilot response for vessel and sea conditions.
Details the alarm triggered when the set timer expires.
Describes the alarm for deviating from the set course by a defined angle.
Explains the alarm when valid GPS information is not received.
Adjusts autopilot response to varying sea conditions and vessel capabilities.
Manages rudder application for smooth course changes by preventing overshoot.
Determines the amount of rudder applied for a given angle off course.
Guidelines for mounting the main control unit and routing wiring.
Instructions for installing magnetic sensor or compass-top sensors.
Details on correctly fitting the rudder feedback sensor for accurate readings.
Wiring diagram for connecting solenoids to the autopilot.
Instructions for connecting the motor drive to the autopilot.
Mounting and connection advice for remote control units.
How to connect a GPS unit using NMEA data for navigation.
Connecting an external buzzer or siren to the autopilot alarm output.
A visual guide to the autopilot's port connections for various components.
Diagram showing system layout with optional accessories.
Technical drawings with dimensions for unit mounting.
Verifying electrical connections and basic dockside functionality.
Guide to entering and using special operational modes and selections.
Setting physical and software limits for rudder travel.
Adjusting trim for straight steering, compensating for external forces.
To Next Page