MAINTENANCE + TROUBLE SHOOTING
Inspection of handlebar + front & rear wheel:
Move the LZR up, down, front, back, left and
right to check whether the handlebars and the
axle of the front and rear wheels are tightened
properly, whether the handlebars are tightened
properly, and whether there is any abnormal
rubbing or damage happening between parts
Push the LZR back and forth to check whether
the front and rear wheels rotate smoothly and
without any abnormal noise or rubbing.
Carefully check the entire vehicle before riding
and if you nd any issues, please contact
a professional for repair or contact ONYX
customer care for help.
Inspection of power circuit:
Turn on the power, operate the pedal assist
level switch, check that all assist levels are
selectable.
Inspection of front + rear brakes:
Pull the front and rear brake levers, and conrm
whether the brakes are working when the
distance between the brake lever and the
handlebar is ½ inch.
When the brake is in a tightly gripped state,
the brake pad and the brake disc should be
contacting evenly.
The brake pads and brake discs should be
replaced at the same time
Seat adjustment:
Proper seat adjustment is to sit on the seat with
the toes of both feet touching the ground.
Damage or contamination of reectors:
Check weather the reectors are dirty or
damaged. If they are, clean or replace them.
To Next Page
Loading...
