Vehicle care 179
Number plate light
1. Prise the light out with a
screwdriver.
2. Remove bulb housing
downwards, taking care not to pull
on the cable.
Rotate bulb holder anticlockwise
to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Interior lights
Courtesy lights
1. To remove it, prise the opposite
side of the light switch using a flat-
blade screwdriver.
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the light assembly.
Load compartment light
1. Prise the light out with a
screwdriver.
2. Remove bulb.
3. Insert new bulb.
4. Install light.
To Next Page
Loading...
