In brief8
Adjusting seat height 3:
Raise or lower lever on outboard
side of seat
Lever pumping action
6 Seats - see page 36,
seat position – see page 38.
Adjusting head restraint height:
Press release button,
adjust height, then release
6 Head restraints - see page 39,
head restraint position – see page 39.
Fitting seat belt:
Draw seat belt smoothly from
inertia reel, guide over shoulder
and engage in buckle
The belt must not be twisted at any point.
The lap belt must lie snugly against the
body.
The backrests must not be tilted back too
far (recommended maximum tilting angle
approx. 25°).
To release belt, press red button on belt
buckle.
6 Seat belts – see pages 43 to 47,
airbag systems – see page 52,
seat position – see page 38.
upward: raises seat
downward: lowers seat
To Next Page
