198 Vehicle care
Towing
Towing the vehicle
Disengage cap at bottom and remove
downwards.
Insignia OPC: Insert screwdriver in
the slot at the upper bend of the cap.
Release the cap by carefully moving
the screwdriver downwards. To
prevent damage it is recommended to
place a cloth between the screwdriver
and the frame.
The towing eye is stowed with the
vehicle tools 3 183.
Screw in the towing eye as far as it will
go until it stops in a horizontal
position.
Attach a tow rope ā or better still a tow
rod ā to the towing eye.
The towing eye must only be used for
towing and not for recovering the
vehicle.
Switch on ignition to release steering
wheel lock and to permit operation of
brake lights, horn and windscreen
wiper.
Transmission in neutral.
Switch on the hazard warning flashes
on both vehicles.
To Next Page
Loading...
