18 Introduction
SDVC (Speed Dependent Volume
Control):
The purpose of the SDVC function is
to compensate for outside and road
noises. To this effect, the volume of
the unit is increased at higher speeds.
Navi announc.:
Volume of the navigation
announcements 3 38.
Start-up volume:
With this setting, the maximum
volume when switching on the unit
can be set.
External In:
An external source (e.g. hands-free
kit) can be connected to the
Infotainment system.
With External In the volume of an
external source can be set in addition
to the volume of the audio sources.
The external source is relayed
automatically by means of a control
signal from the connected unit.
To Next Page
Loading...
