Eye for break-away stopping
cable
Attach the breakaway stopping cable to
eye.
Checking the correct
installation of the coupling ball
bar
● The green marking on the rotary knob
must point towards the green marking
on the coupling ball bar.
●
There must be no gap between the
rotary handle and the coupling ball bar.
●
The coupling ball bar must be firmly
engaged in the opening.
●
The coupling ball bar must be locked
and the key removed.
Warning
Towing a trailer is permitted only when
a coupling ball bar is fitted correctly. If
the coupling ball bar does not engage
correctly, seek the assistance of a
workshop.
Dismounting the coupling ball
bar
Open the protective flap and turn the key
to unlock position to unlock the coupling
ball bar.
Pull out the rotary handle and turn
clockwise as far as it will go. Pull out the
coupling ball bar downwards.
Insert the sealing plug in the opening.
Swivel the connecting socket upwards.
Stow the coupling ball bar in the bag and
secure by fixing the strap through the
rear right lashing eye. Wrap around twice
and tighten the strap to secure the bag.
Driving and operating 119
To Next Page
Loading...
