by the system. The driver accepts
responsibility.
Rear Vision Camera
(RVC)
The rear view camera assists the driver
when reversing by displaying a view of
the area behind the vehicle. It allows
views of the vehicle's surroundings to be
displayed as a nearly 135° picture in the
Information Display.
Warning
The rear view camera does not replace
driver vision. Note that objects that are
outside the camera's field of view and
the parking assist sensors, e.g. below
the bumper or underneath the vehicle,
are not displayed.
Do not reverse or park the vehicle using
only the rear view camera.
Always check the surrounding of the
vehicle before and during driving.
The system uses:
● rear view camera, mounted above the
rear number plate
● ultrasonic parking sensors in the rear
bumper
The screen in the Information Display is
divided into three parts:
●
right side: there is a fixed menu and a
representation of the vehicle
●
middle part: part consists of a standard
view
●
left side: there are the volume settings
of the radio
The parking sensors complete the
information on the view from above the
vehicle.
The area displayed by the rear view
camera is limited. Displayed images may
be further or closer than they appear.
Activation
The rear view camera is activated when
the reverse gear is engaged.
Standard view
The area behind the vehicle is displayed
in the screen. The vertical lines represent
the width of the vehicle with mirrors
unfolded.
The first horizontal line represents a
distance of about 30 cm beyond the
edge of vehicle's rear bumper. The upper
Advanced driving assistance systems 135
To Next Page
Loading...
