Need help?Do you have a question about the Open Air Cinema CINEBOX HOME SYSTEM and is the answer not in the manual?
General| Brand | Open Air Cinema |
|---|---|
| Model | CINEBOX HOME SYSTEM |
| Category | Home Theater System |
| Language | English |
Unfold the screen on a smooth, level surface and uncoil tethers from corners.
Place stakes at 135-degree angles, 10 feet from corners, and attach tethers securely.
Connect the air blower to the intake sleeve using the cinch cord, ensuring it's securely fastened.
Extend speaker stand legs and ensure supports are parallel to the ground for stability.
Position speakers on stands or ground, securing them with locking knobs and pins.
Connect speaker power cords and XLR audio cables to speakers and the CineBox console.
Center projector and console in front of the screen at specified distances for optimal image alignment.
Unzip the console case, loosen cords, and identify all necessary cables for connection.
Connect XLR, HDMI/RCA video, and power cables from speakers, projector, and power source to the console.
Turn on the media player and ensure the audio mixer powers on automatically.
Turn on speakers and set their volume to 50%; adjust main volume via the audio mixer.
Slowly increase the 'Level 1' volume knob until desired audio output is achieved.
Use projector features like zoom, focus, and keystone to fill the screen with a clear image.
Understand aspect ratios and adjust settings to stretch 4:3 content to fill the 16:9 screen.
Connect laptop video out to projector input and audio out to audio mixer input channels.
Connect game system video via RCA/HDMI to projector and audio via RCA to audio mixer.
Use 3.5mm or special iPod cables to connect players to the audio mixer and projector.
Spot clean screen with mild detergent and water; do not machine wash or soak.
Verify power cord connection and ensure the power source is active.
Check that air vents are closed and inflatable tubes are not twisted.
Ensure all connections, power, and volume settings are correct for audio components.
Verify component connections, input selection, and that source/projector are powered on.
Read all instructions carefully to prevent injury or damage to equipment.
Details limited manufacturer warranties for screen, console, and other components.
Important electrical precautions for system operation, including circuit and receptacle requirements.
To Next Page