To Next PageTo Next Page
Need help?Do you have a question about the Opes OP-WS01/WH1170 and is the answer not in the manual?
General| Model Number | OP-WS01/WH1170 |
|---|---|
| Brand | Opes |
| Wireless Transmission | Yes |
| Display Type | LCD |
| Backlight | Yes |
| Temperature Measurement Range | -40°C to 60°C |
| Rainfall Measurement | 0 to 9999 mm |
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Transmission Range | 100 meters |
| Temperature Range (Indoor) | 0°C to 50°C |
| Temperature Range (Outdoor) | -40°C to 60°C |
| Wind Speed Measurement Range | 0 to 50 m/s |
| Power Source | Batteries |
Instructions for installing batteries in the remote sensor and base station, noting polarity and battery types.
Guidance on how to mount the base station and remote sensor for optimal signal reception and accurate readings.
Detailed illustration and explanation of all segments of the LCD display for description purposes.
Explanation of weather forecast icons and their relation to barometric pressure changes.
Description of the arrows indicating air pressure tendency and forecast weather.
Visual examples of how weather icons change based on atmospheric conditions.
Details on the storm warning feature and its activation threshold.
Mode for quickly viewing outdoor temperature, dew point, absolute, or relative pressure.
Accessing and configuring settings like time zone, units, calibration, and pressure thresholds.
Procedure to calibrate indoor and outdoor humidity readings for accuracy.
Explanation of absolute vs. relative pressure and how to set relative pressure.
Setting up high and low alarms for time, temperature, humidity, and pressure.
Accessing and resetting the recorded minimum and maximum values for various measurements.
