1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a
charger (5V 1A) or PC and correctly position the
other end of the cable on the back of the smartwatch.
I notify:
1) Use the charger only on a flat and stable surface.
2) If there is an obstacle between the smartwatch and
the charging cable, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do not leave
the device charging for whole nights). To avoid damaging the device,
use only the supplied cable.
4) Do not use if the charging device is damaged.
5) Unplug the charging device when cleaning the smartwatch, during
82 348
1122
6
6
3399
26.68
bpm
999BPM
13.4
569
D
D
O
O
M
M
28/02
28/02
To Next Page
Loading...