1
To mute the connection, press the
button briefly. The status indicator
flashes YELLOW.
2
To unmute, press the button again
briefly.
1
Plug in the 3.5 mm jack cable to send
sound to the students’ hearing aids
from external sound sources like
sound field systems, smartboards or
PC/tablets, etc.
2
When the cable is connected, the
status indicator turns YELLOW, and
the EduMic microphone is disabled
(OFF). Unplug the cable from EduMic
to use the microphone.
Use the jack cable
Audio connections
EduMic is connected
with cable or FM
receiver
Connection is muted
Mute/unmute connection
1
Plug in the FM receiver (not included)
to send sound to the students’
hearing aids from classroom
microphone systems like Oticon
Amigo. Ensure the EduMic is placed
within 9.5 feet from the hearing aids.
Use of FM connection
LED indicator overview
Power indicator
Charging time for full charging is 2.5 hours.
A quick 30 minute charge during a break
provides approx. 2.5 hours of use.
When the power indicator flashes RED, there
is approx. 2 hours of battery life remaining.
Status indicator
A steady light indicates you are sending
sound. A flashing light indicates that
EduMic is muted.
White Start-up
Flashing blue Pairing in progress
Green ON/microphone mode
Flashing green
Mute in microphone
mode
Yellow Jack/FM mode
Flashing yellow Mute in jack/FM mode
Red Pairings cleared
Magenta Telecoil mode
Flashing magenta Mute in telecoil mode
White Start-up
Green Fully charged
Flashing yellow Charging
Flashing red Battery low
To Next Page
Loading...