M-10
Specifications Manual
19
9.9. Auto Trigger
The scanner starts scanning automatically when it detects a change in brightness that occurs when
a barcode label is presented in front of it.
The scanner should be triggered when a gray-colored paper is presented in front of a black-colored
background paper.The scanner should also be triggered when a black-colored paper is presented in
front of a gray-colored background paper.
<Conditions>
Ambient light : 500 ~ 1000 lx
Moving speed of detected paper : 2 m/s or slower
Figure 15: Auto Trigger
9.10. Motion Tolerance
0.33mm UPC/EAN can be read when it is moving at 2m/s.
<Conditions>
Ambient light : 500 ~ 1000 lx (on the surface of a barcode)
Distance : 65 mm from the front edge of the scanner
Barcode : 0.33mm UPC/EAN specified in Section 9.1
Figure 16: Motion Tolerance
* The above shows the capability of capturing/scanning a moving target and 100% scanning is not guaranteed.
* The reading characteristics may deteriorate due to the specular reflection of LED illumination when the reflectivity
is high.
To Next Page
Loading...
