Opticon M-10 - 18 Default Setting; Default Setting Menu Code; Supported Symbologies; Barcodes

M-10
Specifications Manual
30
18. Default Setting
18.1. Default Setting Menu Code
The M-10 is set to default settings by reading the following menu label regardless of the interface
types.
Default
@MENU_OPTO@ZZ@BAP@ZZ@OTPO
_
UNEM@
18.2. Supported Symbologies
18.2.1. 1D Barcodes
Code type
Read
Setting
Minimum
length
Remarks
UPC ○ -
UPC Add-on 2
UPC Add-on 5
EAN(JAN) ○ -
EAN Add-on 2
EAN Add-on 5
EAN-13 ○
EAN-13 Add-on 2
EAN-13 Add-on 5
EAN-8 ○
EAN-8 Add-on 2
EAN-8 Add-on 5
Code 39 ○ 1 Not transmit ST/SP
Tri-Optic ○ - Not transmit ST/SP
Codabar ○ 2 Not transmit ST/SP
Industrial 2of 5 ○ 5
Interleaved 2of 5 ○ 6
S-Code 5
Code 128 ○ 1 GS1 conversion (setting required)
Code 93 ○ 1
IATA ○ 5
MSI/Plessey 3
UK/Plessey 2
Telepen 1
Code 11 1
Matrix 2 of 5 5
18.2.2. Postal Codes
Code type
Read
Setting
Minimum
length
Remarks
Chinese Post Matrix 2 of 5 -
Korean Postal Authority -
Intelligent Mail Barcode -
POSTNET -
PLANET -
Japan Postal -
Netherlands KIX Code -
UK Postal (Royal mail) -
Australian Postal Code -