M-10
Specifications Manual
32
18.3. Other Default
Item Default Setting
Read mode Auto trigger
Extended read time Disable (Auto)
Buzzer duration 50ms
Buzzer tone 2.65 kHz
Startup buzzer Enable
Buzzer loudness Max (100%)
Good read LED indicator duration 200 ms
Added suffix value CR
Multiple read reset time 400ms
Auto trigger detection sensitivity High
Transition time to auto trigger sleep 1 min
Data buffering Buffered mode
18.4. USB-HID Default
Item Default Setting
Keyboard language USA
Inter-character delay No delay
18.5. USB-USB Default
Item Description
Baud rate USB2.0 Full Speed
Power supply 500 mA
Vender ID 065A
Product ID A002
Standards CDC-ACM
* It is necessary to install Opticon USB Driver to a host.
18.6. RS-232C Default
Item Default Setting
Baud rate 9600 bps
Parity bits No parity
Data length 8 bits
Stop bits 1 bit
Handshaking No handshake
To Next Page
Loading...
