NLV-4001
2nd
16
9.10 Cable Strength
There shall be no sign of malfunction after the following cable strength test.
Cable Strength Test: Affix the scanner to an immovable object and pull it using a force of 24.5 N (2.5
kgf static loading) for 1 second. Repeat this 20 times continuously.
9.11 Cable Bending Strength
There shall be no sign of malfunction after the following cable bending test.
Cable Bending Test: Add a load of 4.9 N (500 gf) to a cable and bend it at an angle of 60° to both
right and left. Repeat this 1000 times continuously.
Figure 13: Cable Bending
To Next Page
Loading...
