OPH-5000i
1st
12
No Name Description
1 LED
Indicates operational status, such as scanning and
communication.
It is able to be controlled b
rams.
2 LCD Indicates scanned barcodes and operational items.
3 MicroUSB Connecter Cap MicroUSB connector is stored.
4 Buzzer Orifice Holes for buzzer.
5 Strap Orifice Holes for attaching a hand strap.
6 Scan Window LED illumination is emitted from this window to read barcodes.
7 Battery Cover Rechargeable battery is stored.
8 Battery Cover Lock Used to lock / open the battery cover.
9 Charging Coil
The charging coil is located here with which the dedicated cradle
can su
ower to the scanner.
10 NFC
This is the location of the NFC tag. Hold an NFC reader close to
this area when the ta
has to be read.
11 Side Trigger Sensor Start an operation of reading code by touching.
12 Trigger Key Press when reading code.
13 Up and Down Key Key use for selecting item and moving cursor.
14 Numeric Keypad
Numeric, enter, decimal point key and the key’s to support these
inputs.
15 F1, F2, F3 Function key.
16 Power Key Power On/Off key.
To Next Page
Loading...