Opticon OPR 3001 - Page 30

Opticon
OPR 3001
Specifications Manual
30
Symbology Read Transmit
Code
Length
Transmit
CD
Calculate
CD
Set
Prefix
Set
Suffix
Other
Code 93

X X

— CR
Code 128

X X

— CR
GS1-128
(EAN/UCC-128)
X X X

— CR
GS1 DataBar
(RSS) (all, incl.
CC-A/B); Limited/
Expanded
X X
 
— CR
IATA

X

X — CR
Industrial2of5

X

X — CR
Interleaved2of5

X

X — CR
Korean Postal
Code (Code
3of5)
X X X

— CR
Matrix2of5 X X

X — CR
MicroPDF417 X X — — — CR
PDF417 X X — — — CR
MSI/Plessey

X CD1 CD1 — CR
S-Code

X

X — CR
Telepen

X X

— CR
Trioptic

X — — — CR Not transmit ST/SP
UK/Plessey

X
 
— CR
Notes:
In the “Reading” column, “
” means “Enable reading” and “X” means “Disable reading.”
In the “Transmit code length” column, “
” means “Transmit code length” and “X” means
“Do not transmit code length.”
In the “Transmit CD” column, “
” means “Transmit check digit” and “X” means “Do not
transmit check digit.”
In the “Calculate CD” column, “
” means “Calculate check digit” and “X” means “Do not
calculate check digit.”
“— “ means “not supported.”
In the “Prefix” column, “—“ means “there is no prefix setting.”