Opticon OPR 3001 - 16 Trigger and Read Settings; Auto Trigger Settings; Enable;Disable Settings; Figure 27: Auto Trigger Detection Area

Opticon
OPR 3001
Specifications Manual
39
Figure 27: Auto trigger detection area
16. Trigger and Read Settings
16.1. Auto Trigger Settings
16.1.1. Enable/Disable Settings
Use the following settings to enable or disable the auto trigger. (Auto trigger is
disabled by default).
To enable auto trigger, scan “ZZ”, “+I” and “ZZ” in that order.
To disable auto trigger, scan “ZZ”, “+F” and “ZZ” in that order.
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
Disable auto trigger
_+F_
+F
Enable auto trigger
_+I_
+I
END
_ZZ_
ZZ