Opticon PX-20 - 8 Barcode Reader Technical Specifications

To Next Page

To Previous Page

Opticon

PX-20

Specifications Manual

Ambient Temperature and Humidity : Room temperature and room humidity

Ambient Light

: 100 ~200 lux (on the surface of a bar code)

Pitch Angle

: α= 0°

Skew Angle

: β = 15°

Tilt Angle

: γ = 0°

Curvature

: R = ∞

Power Supply Voltage

: 3.3 and 5.0 V

PCS (1D and 2D)

: 0.9 or higher

Scanning Test

: Accept the performance with 90% or more success

rate for 10 tries of scan. One scan should be tested

within 2 seconds.

Bar Code Test Sample (1D and 2D)

: Specified below

8. Barcode reader Technical Specifications

Scanning is done by pointing the PX-20’s aiming light to the center of a bar code for scanning.

The conditions for technical specifications are as follows,

unless otherwise specified in each section.

< Test chart >

For 1D codes, OPTOELECTRONICS test samples

For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for bar code

Other manuals for Opticon PX-20