Assembly and maintenance instruction recirculating ball
OPTIMUM
MASCHINEN - GERMANY
5. Dezember 2007Page 32 Recirculating ball screw assembly and maintenance instruction ; Version 2.0
© 2007
GB
£ Fix the limit stops as well as the
indicator of the X-axis using the
hexagon socket screws.
£ When mounting the CNC kit, you
should no longer use the clamping
levers to clamp the table since they
might possibly interfere when
traveling the axes. Use hexagon
socket screws with counternuts
instead.
Fig.1-58: Assembly limit stops or
indicator X-axis
Limit stops
Indicator
Hexagon socket
screws
Indicator
To Next Page
Loading...