Need help?Do you have a question about the Optoma GT750 and is the answer not in the manual?
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | 0.5 - 5 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 32.24 - 322.41 \ |
| Projector native resolution | WXGA (1280x800) |
| Audio input | Yes |
| RS-232 ports | 0 |
| Compatibility | 3D Playstation3/Xbox360, 3D Blu-ray, 3D Broadcasts (SKY 3D & Virgin 3D) |
| USB mass storage | No |
| Power supply type | AC |
| Dimensions (WxDxH) | 324 x 234 x 97 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Throw ratio | 0.72:1 |
| Focal length range | - mm |
| Lamp power | 230 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Supported video modes | 1080i, 1080p, 480p, 576p, 720p |
| Analog signal format system | - |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 27 dB |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | Black |
| LED indicators | Power, Status |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 340 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Cables included | AC, VGA |
| Remote control type | IR |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 234 mm |
|---|---|
| Width | 324 mm |
| Height | 97 mm |
| Weight | 2970 g |
Explains projector error status based on LED indicator lights.
Outlines primary troubleshooting steps for common projector symptoms.
Lists the necessary equipment for performing functional tests.
Defines the optimal environment and setup for projector testing.
Details the testing procedures for various input/output ports.
Describes the post-repair procedure to ensure product stability.
To Next Page
