Display Type
Single 0.55” DMD DLP Technology by
Texas Instruments
Native Resolution
Native SVGA (800 x 600)
Maximum Resolution
UXGA (1600 x 1200)
Brightness (Typical)
3000 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
6000/3000 Hours (Standard/Bright)
200W
Throw Ratio
1.95 to 2.15:1 (Distance/Width)
Projection Distance
3.28’ to 32.8’ (1.0 to 10m)
Image Size (Diagonal)
22.9” to 300” (0.58 to 7.62m)
Aspect Ratio
16:10, 16:9 and Native 4:3 Compatible
Horizontal Scan Rate
15.3 - 91.1 KHz
Vertical Refresh Rate
25 - 85Hz, 120Hz
Offset
115%
Keystone Correction
±40° Vertical
Displayable Colors
1.07 Billion
Uniformity
85%
Audio
2-Watt Speaker
Remote Control
IR Remote
Computer Compatibility
HD, UXGA, WXGA, SXGA+, SXGA, XGA,
SVGA, VGA Resized, VESA, PC and
Macintosh Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV
(480p), HDTV (720p, 1080i/p)
3D Compatibility
120Hz Frame Sequential 3D for Resolutions
Up to 720p, 60Hz Field Sequential 3D for
Resolutions Up to 480i
Monitor Loop Through
D-Sub 15 pin VGA Output (Functional in
Both Normal and Standby Modes)
Projection Lens
F= 2.41-2.55, f = 21.8-23.98mm, 1.1x
Manual Zoom and Focus
User Controls
Complete On-Screen Menu Adjustments in
23 Languages
I/O Connectors
HDMI, VGA-In, VGA-Out, S-Video,
Composite Video, Stereo Audio-In, Stereo
Audio-Out and RS-232
Security
Kensington® Lock Port, Security Bar and
Keypad Lock
Projection Method
Front, Rear, Ceiling Mount, Table Top
Weight
5 lbs (2.27kg)
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Operating Temperature
41 to 104°F (5 to 40°C), 85% Max Humidity
Dimensions (W x H x D)
11.28” x 3.98” x 7.6”
(287 x 101 x 193 mm)
Noise Level (STD/BRIGHT)
29dB/35dB
Power Consumption
247 Watts (Bright), 200 Watts (Standard),
<5 Watts (Standby-Active), <1 Watt
(Standby/Eco)
Warranty
1 Year Limited Parts and Labor,
90 Days on Lamp
Standard Accessories
AC Power Cord, VGA to VGA Cable,
Remote Control, Batteries for Remote,
Carrying Case, Lens Cap, Multilingual
CD-ROM User’s Manual, Quick Start Card
and Warranty Card
Optional Accessories
HDMI Cable, Ceiling Mount, VGA to
Component Cable, S-Video Cable,
Composite Video Cable, RS-232 Cable
and Panoview™ Series Screens
UPC
796435 41 662 1
Accessory Part Numbers
Below part numbers may change:
Lamp: BL-FU185A
Remote: BR-3043N
Mount: BM-5001U
© Copyright 2011 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of Texas Instruments. All specifications subject to change at any time.
www.optoma.com
Datasheet – PRO160S
PRO160S − Multimedia Projector
Brilliant Large Screen Display
The Optoma PRO160S is the ideal projector for multiple usages in business and education.
Featuring high brightness of 3000 ANSI lumens and a high contrast ratio of 3000:1,
the PRO160S projects exceptional color quality. With an HDMI input and 3D capability,
the PRO160S is ready to take on any presentation challenge.
* 3D content can be viewed with active LCD shutter glasses when the projector is
connected to a computer with a compatible 3D graphics card.
Please visit www.optoma.com for more information.
Features
Native SVGA DLP® by Texas Instruments with BrilliantColor™ Technology
Bright images and high contrast ratio – 3000 ANSI lumens and 3000:1 contrast ratio (full on/full off)
Rapid power-on and shutdown – saving you time and money
Filter-free design means low cost of ownership
High-definition resolution supported
Wide range of connectivity options: HDMI, VGA-in, VGA-out, s-video, composite video, stereo
audio-in, stereo audio-out and RS-232
Specifications
* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.
Need help?
Display
Optical
Power
