Display Type
Single 0.65” DMD DLP Technology by
Texas Instruments
Native Resolution
Native WXGA (1280 x 800)
Maximum Resolution
HD (1920 x 1080)
Brightness (Typical)
3000 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
6000/3000 Hours (Standard/Bright)
200W
Throw Ratio
1.55 to 1.7:1 (Distance/Width)
Projection Distance
3.28’ to 32.8’ (1.0 to 10m)
Image Size (Diagonal)
27.2” to 301” (0.58 to 7.62m)
Aspect Ratio
16:10 Native, 16:9 and 4:3 Compatible
Horizontal Scan Rate
15.3 - 91.1 KHz
Vertical Refresh Rate
25 - 85Hz, 120Hz
Offset
115%
Keystone Correction
±40° Vertical
Displayable Colors
1.07 Billion
Uniformity
85%
Audio
2-Watt Speaker
Remote Control
IR Remote
Computer Compatibility
HD, UXGA, WXGA, SXGA+, SXGA, XGA,
SVGA, VGA Resized, VESA, PC and
Macintosh Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV
(480p), HDTV (720p, 1080i/p)
3D Compatibility
120Hz Frame Sequential 3D for
Resolutions Up to 720p, 60Hz Field
Sequential 3D for Resolutions Up to 480i
Monitor Loop Through
D-Sub 15 Pin VGA Output (Functional in
Both Normal and Standby Modes)
Projection Lens
F= 2.41-2.55, f = 21.8-23.98mm, 1.1x
Manual Zoom and Focus
User Controls
Complete On-Screen Menu Adjustments
in 23 Languages
I/O Connectors
HDMI, VGA-In, VGA-Out, S-Video,
Composite Video, Stereo Audio-In,
Stereo Audio-Out and RS-232
Security
Kensington® Lock Port, Security Bar and
Keypad Lock
Projection Method
Front, Rear, Ceiling Mount, Table Top
Weight
5 lbs (2.27kg)
Power Supply
AC Input 100-240V, 50-60Hz, Auto-Switching
Operating Temperature
41 to 104°F (5 to 40°C), 85% Max Humidity
Dimensions (W x H x D)
11.28” x 3.98” x 7.6”
(287 x 101 x 193 mm)
Noise Level (Standard/Bright)
29dB/35dB
Power Consumption
247 Watts (Bright), 200 Watts (Standard),
<5 Watts (Standby-Active), <1 Watt
(Standby-Eco)
Warranty
1 Year Limited Parts and Labor,
90 Days on Lamp
Standard Accessories
AC Power Cord, VGA to VGA Cable, Remote
Control, Batteries for Remote, Carrying
Case, Lens Cap, Multilingual CD-ROM User’s
Manual, Quick Start Card and Warranty Card
Optional Accessories
HDMI Cable, Ceiling Mount, VGA to
Component Cable, S-Video Cable,
Composite Video Cable, RS-232 Cable and
Panoview™ Series Screens
UPC
796435 41 664 5
Accessory Part Numbers
Below part numbers may change:
Lamp: BL-FU185A
Remote: BR-3043N
Mount: BM-5001U
© Copyright 2010 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of Texas Instruments. All specifications subject to change at any time.
www.optoma.com
Datasheet – PRO360W
PRO360W − Multimedia Projector
Brilliant Large Screen Display
The Optoma PRO360W is the ideal projector for multiple usages in business and
education. Featuring high brightness of 3000 ANSI lumens and a high contrast
ratio of 3000:1, the PRO360W projects exceptional color quality. With an HDMI input
and 3D capability, the PRO360W is ready to take on any presentation challenge.
* 3D content can be viewed with active LCD shutter glasses when the projector is
connected to a computer with a compatible 3D graphics card.
Please visit www.optoma.com for more information.
Features
Native WXGA DLP® by Texas Instruments with BrilliantColor™ Technology
Bright images and high contrast ratio – 3000 ANSI lumens and 3000:1 contrast ratio (full on/full off)
Rapid power-on and shutdown – saving you time and money
Filter-free design means low cost of ownership
Protect your investment – control panel lock and password protection allow you to customize
security settings
Wide range of connectivity options: HDMI, VGA-in, VGA-out, s-video, composite video, stereo
audio-in, stereo audio-out and RS-232
Specifications
* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.
Need help?
Display
Brightness and Contrast
Power
Weight and Dimensions
