EN-39
OPTIONS
Input Source
Use this option to enable / disable input sources. Press / /“Enter” key to
enter the sub menu and select which sources you require. Press “Enter” to
finalize the selection. The projector will not search for inputs that are not
selected.
Source Lock
On: The projector will only search current input connection.
Off: The projector will search for other signals if the current input signal is
lost.
High Altitude
When “On” is selected, the fans will spin faster. This feature is useful in high
altitude areas where the air is thin.
Note
With dust filter installed, High Altitude mode must be turned on manually. Dust filter is
Optional and may not be required in some regions.
Information Hide
On: Choose “On” to hide the info message.
Off: Choose “Off” to show the “searching” message.
To Next Page
Loading...
Need help?
General
