Optoma PS200T Quick Start Guide

Quick Start Guide
HQView6xx/HQUltra7xx/LEDView7xx
Test Paerns
Selects built-in test
paerns or stored
images. Use jog wheel
to scroll through
Funcon Shortcuts
● Blank: Sets the o/p to black
● Freeze: Freezes the output
● Logo: Displays stored LOGO
● PTZ: Selects poron of the input
image to be scaled
Press to toggle funcons ON or OFF
Standby
Graphic image shown above is for the fully loaded PS300T /LS300T
Refer to the table below for other conguraons and their corresponding models
Outputs
● 1xHDMI 4K ● 1xDVI/HDMI
● 1xHDBaseT 4K ● 1x3G-SDI
Control
● 1x TCP/IP DHCP default, port 30000
● 1xRS232: 115200,1,8, No Parity, O
● 2xUSB
Conguraon
PS200 PS200T PS300T LS200 LS300T LS200T
Inputs: 2xHDMI 4K, 1xHDMI HD, 1xDisplayPort 4K, 1xVGA, 1xCVBS, 1xDVI
-U (DVI/HDMI & VGA/RGBS/YPbPr), 1x Streaming Video
Outputs: 1xHDMI 4K, 1xDVI/HDMI
UHD/4K 50/59.94/60p modes supported in 4:2:0 format
● ● ● ● ● ●
Inputs: 2x3G-SDI, Genlock / Outputs: 1x3G-SDI
● ●
Inputs: 1xHDBT 4K / Outputs: 1xHDBT 4K
●
● ● ●
Analogue Audio In, Out and Power Amp
● ● ● ● ● ●
Menu Navigaon
● Menu Sel: Enter or select a menu
● Esc: Exit the menu or jump to exit item
● Display: 4-line high contrast LCD display
● Jog Wheel: Scroll through the menu,
change value or press to enter a selecon
Video & Audio Inputs
● 1xDisplayPort 4K ● 1xVGA
● 2xHDMI 4K ● 1xCV
● 1xHDBaseT 4K ● 2x3G-SDI
● 1xIP Video
● 1xDVI/RGB YPbPr ● 1xHDMI
Speaker/Line Output
Genlock Input
Front Panel Key Shortcuts
 Keypad unlock: Esc + Menu/Sel
 Mode reset: Esc + CV
 Factory reset: Esc YPbPr
 Set output mode to 720p: Esc + VGA
 Firmware version: Standby + Esc
Quick Start Guide
PS200,PS200T,PS300T, LS200, LS200T, LS300T

Optoma PS200T Specifications

General

Brand	Optoma
Model	PS200T
Category	Switch
Language	English