EasyManua.ls Logo

Optoma TW610ST User Manual

Optoma TW610ST
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
57
English
Appendices
RS232 Pin Assignments
Pin no.
Spec.
(from projector side)
1 TXD
2 RXD
3 GND
RS232 Commands and Protocol
Function List
3
1 2
v RS232 shell is
grounded.

Other manuals for Optoma TW610ST

Question and Answer IconNeed help?

Do you have a question about the Optoma TW610ST and is the answer not in the manual?

Optoma TW610ST Specifications

Display IconDisplay
native resolutionWXGA (1280 x 800)
maximum resolutionUXGA (1600 x 1200)
brightness3100 ANSI Lumens
contrast ratio3000:1
displayable colors1.07 Billion
Projection IconProjection
projection distance1.6' to 8.2' (0.5 to 2.5m)
image size (diagonal)44.6" to 222.8" (1.13 to 5.6m)
throw ratio0.52 (Distance/Width)
offset112%
Audio IconAudio
built-in speakersTwo 5-Watt Speakers
microphone inputYes
audio outputStereo Audio-Out
Power IconPower
power supplyAC Input 100-240V, 50-60Hz, Auto-Switching
power consumption325 Watts Max (Bright), 250 Watts (STD), <1 Watt (Standby)
lamp life4000/3000 Hours (STD/Bright)
Operating Environment IconOperating Environment
operating temperature41 to 104°F (5 to 40°C)
operating humidity85% Max Humidity
Weight and Dimensions IconWeight and Dimensions
weight6.9lbs (3.1kg)
dimensions12” x 4.5” x 9.6” (306 x 114 x 243 mm)
noise level29dB/31dB

Summary

RS232 Protocol Function List

Power and Resync Commands

Commands for powering ON/OFF, password, and signal resynchronization.

Image and Display Control

Commands for image freeze, zoom, pan, and display mode settings.

Image Adjustment Parameters

Commands for adjusting brightness, contrast, sharpness, and color.

Color and White Balance Settings

Commands for color gains, biases, and color temperature.

RS232 Command Details (Continued)

Input Source and Image Settings

Commands for selecting input sources and adjusting image AI, tint, and color.

RS232 Command Emulation

Remote Control Emulation Commands

Commands to emulate remote control functions for navigation and selection.

Related product manuals