To Next PageTo Next Page
Need help?Do you have a question about the Optoma X351 and is the answer not in the manual?
General| Matrix size | 0.55 \ |
|---|---|
| Matrix type | DMD |
| Number of colors | 1.073 billion colors |
| Native aspect ratio | - |
| Projection distance | 1.2 - 12 m |
| Vertical scan range | 24 - 120 Hz |
| Horizontal scan range | 15.375 - 91.4 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Screen size compatibility | - \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -40 - 40 ° |
| Focus | Manual |
| Offset | 115 % |
| Throw ratio | 1.95 - 2.15:1 |
| Zoom capability | Yes |
| Focal length range | 21.79 - 23.99 mm |
| Aperture range (F-F) | 2.41 - 2.55 |
| Lamp power | 210 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 7000 h |
| Full HD | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
| HDMI version | 1.4a |
| Audio (L/R) in | 0 |
| USB connector type | Mini-USB B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Optical disc player type | Not included |
| Noise level | - dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 10 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 280 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (economy mode) | 194 W |
| Contrast ratio | 20000:1 |
| Cables included | VGA |
| Remote control type | IR |
Weight and Dimensions| Depth | 224 mm |
|---|---|
| Width | 314 mm |
| Height | 101 mm |
| Weight | 2490 g |
General warnings and instructions to prevent electrical shock and fire hazards.
Important warnings and recommendations for safe projector operation and maintenance.
Guidelines on proper operation, cleaning, and environmental conditions for the projector.
Advice on eye safety and a list of the projector's key technical specifications.
Lists the items included in the projector's packaging.
Identifies the main components and ports of the projector unit.
Describes the buttons and indicators on the projector's control panel.
Details the various connectors for inputting and outputting signals and power.
Explains the functions of each button on the projector's remote control.
Provides instructions and diagrams for connecting the projector to a computer.
Guides on connecting the projector to external video devices like DVD players.
Step-by-step guide to turn the projector on and initiate startup.
Instructions on shutting down, cooling cycle, and understanding LED status warnings.
Details how to use the projector's adjustable feet to set its height.
Explains how to use the zoom ring and focus ring for image clarity.
Provides guidance on image size based on projection distance and series.
Tables detailing screen size, projection distance, and offset for standard modes.
Tables detailing screen size, projection distance, and offset for short throw modes.
Explains the function of each button on the projector's control panel.
Details the operation of each button on the remote control.
Explains how to select input sources (HDMI, VGA, Video) using the remote.
Table listing NEC codes for remote control functions.
Instructions and precautions for installing batteries in the remote control.
Guide on accessing the projector's help menu via the control panel.
Information on how the help menu functions and basic troubleshooting tips.
Specific help messages and solutions for image and audio problems.
Explains how to navigate and operate the projector's on-screen display menus.
Details settings within the IMAGE menu, including Display Mode and Brightness.
Settings for OSD language and projection direction.
Explains image presets and how to adjust brightness and contrast.
How to adjust image sharpness, saturation, and color balance.
Explains Gamma tables, BrilliantColor, and Color Temperature adjustments.
Details color settings, color space options, and factory reset.
Explains automatic signal selection, phase, frequency, and position adjustments.
How to choose aspect ratio (4:3, 16:9, Native, AUTO) for input signals.
Tables detailing aspect ratio and resolution compatibility for WXGA.
Instructions for image correction using edge mask, zoom, shift, and keystone.
Configuration for 3D mode, format, and sync inversion.
How to change OSD language and projection orientation.
Settings for screen type and assigning a projector ID.
How to enable/disable security and change the projector password.
Information on incorrect password entry and forgotten password recovery.
Configuration for internal speaker, mute, volume, and audio input assignment.
Configuration for network state, DHCP, IP address, and subnet mask.
Configuration for DNS, applying network settings, and MAC address.
Configuration for Logo startup screen and closed captioning.
Managing input sources and controlling source lock behaviour.
Configuration for remote control IR sensor and background color display.
How to customize functions for User 1/2/3 keys on the remote.
Settings for direct power on, auto power off, sleep timer, and power mode.
Information on lamp hours, reminder, brightness mode, and lamp reset.
Configuration for optional dust filter reminders and reset.
Steps to resolve issues like no image or partial/incorrect display.
Solutions for notebook display issues and unstable/flickering images.
Solutions for vertical flickering, focus, stretched images, and size issues.
Solutions for reversed images, projector freezing, and 3D display problems.
Explains the meaning of different LED light combinations for projector status.
Interprets on-screen warnings and provides remote control troubleshooting.
Warnings and safety advice before proceeding with lamp replacement.
Step-by-step guide for safely replacing the projector lamp module.
Instructions for installing, cleaning, and resetting the projector's dust filter.
Tables detailing signal and resolution compatibility with different devices.
Details compatibility for 3D input signals and timing formats.
Diagram and list of pins for the RS232 serial communication interface.
List of RS232 commands for projector control and their functions.
Continuation of RS232 commands for various settings and features.
Further RS232 commands for projector settings and remote emulation.
Commands to read projector status and settings via RS232.
Guidelines and specifications for safely mounting the projector to a ceiling.
Contact details for Optoma offices worldwide for service and support inquiries.
FCC compliance statement for Class B digital devices.
FCC operation conditions, Canadian notice, and disposal instructions for the projector.
