Do you have a question about the Optoma ZK507 and is the answer not in the manual?
Number of colors | 1.073 billion colors |
---|---|
Native aspect ratio | 16:10 |
Projection distance | 1.3 - 9.3 m |
Vertical scan range | 24 - 120 Hz |
Projection technology | DLP |
Supported aspect ratios | 4:3, 16:10, 16:9 |
Contrast ratio (typical) | 2000000:1 |
Screen size compatibility | 26.45 - 302.2 \ |
Projector native resolution | 2160p (3840x2160) |
Noise level | 30 dB |
Number of OSD languages | 10 |
On Screen Display (OSD) | Yes |
On Screen Display (OSD) languages | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS |
RMS rated power | 5 W |
Number of built-in speakers | 2 |
Light source type | Laser |
Service life of light source | 20000 h |
Throw ratio | 1.39:1 - 2.22:1 |
Focal length range | 20.91 - 32.62 mm |
Vertical lens shift range | 0 - 15 % |
Placement | Ceiling, Floor |
Product type | Large venue projector |
Product color | White |
Market positioning | Presentation |
Built-in display | No |
Supported 3D formats | Frame packing, Side by side, Top and bottom |
Analog signal format system | - |
Power source | AC |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (max) | 368 W |
Power consumption (standby) | 0.5 W |
Power consumption (typical) | 274 W |
HDMI version | 1.4a/2.0 |
HDMI connector type | Full-size |
Serial interface type | RJ-45 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Operating temperature (T-T) | 5 - 40 °C |
Harmonized System (HS) code | 85286200 |
Depth | 331 mm |
---|---|
Width | 498 mm |
Height | 141 mm |
Weight | 9800 g |