Need help?Do you have a question about the Optoma ZU920T and is the answer not in the manual?
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | 1.33 - 13.06 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:10, 16:9 |
| Contrast ratio (typical) | 3000000:1 |
| Screen size compatibility | 50 - 300 \ |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, horizontal | 30 ° |
| Built-in display | - |
| Light source type | Laser |
| Service life of light source | 30000 h |
| Offset | 50 % |
| Throw ratio | 1.25:1 ~ 2:1 |
| Focal length range | 18.72 - 29.59 mm |
| Vertical lens shift range | 0 - 55 % |
| Horizontal lens shift range | 0 - 25 % |
| HDBaseT port | Yes |
| HDMI connector type | Full-size |
| HDMI ports quantity | 3 |
| Serial interface type | RJ-45, RS-232 |
| USB 2.0 ports quantity | 0 |
| Remote control type | Wired |
| Noise level | 38 dB |
| Number of OSD languages | 10 |
| Noise level (economic mode) | 36 dB |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, POR, RUS |
| Product type | Ultra short throw projector |
| Product color | Black |
| Cable lock slot type | Kensington |
| RMS rated power | 20 W |
| Number of built-in speakers | 2 |
| Power source | AC |
| AC input voltage | 90 - 264 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 505 W |
| Power consumption (standby) | - W |
| Power consumption (typical) | 260 W |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 376 mm |
|---|---|
| Width | 480 mm |
| Height | 144 mm |
| Weight | 14000 g |
| Package weight | 17500 g |
To Next Page
