4 of 49
OP940-SW
Initial Preparation
Unpacking and Inspection
The unit was carefully inspected, mechanically, electrically and optically before shipment.
When received, the shipping carton should contain the items listed in Standard Contents.
Account for and inspect each item. In the event of a damaged instrument, write or call
OptoTest Corp, California.
Note: Be aware that accessories such as detector adapters, remote head detectors, and
high performance reference cables will be located inside a small box labeled “Accessories
Inside”. If this box is not included with the original shipment, contact OptoTest of their
nearest distributor.
Please retain the shipping container in case re-shipment is required for any reason.
Damaged In Shipment
All instruments are shipped F.O.B. Camarillo when ordered from OptoTest.
If you receive a damaged instrument you should:
1. Report the damage to your shipper immediately.
2. Inform OptoTest Corporation.
3. Save all shipping cartons.
Failure to follow this procedure may aect your claim for compensation.
Standard Contents
1. Model OP940 IL/RL Test Set
2. Power Cord (U.S. Shipments only)
3. USB A-B cable
4. Certicate of Calibration and if requested the Metrology Report
5. Instruction Manual(s)
6. CD/USB with applicable software and documentation (if ordered)
7. Detector Adapters (if applicable)
To Next Page
Loading...