EasyManua.ls Logo

Orava RR-41 - Page 8

Orava RR-41
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EN
Check/Commissioning
We recommend performing both initial and subsequent regular device
inspections.
Never use the device if it is incomplete, damaged, or any part of it has
been damaged during use.
Do not use non-original and incomplete parts of the device and its acces-
sories. There is a risk of serious injury!
There is a risk of damage to the equipment or other property damage!
If the equipment has been transported and stored at low temperatures (eg
in the winter) or excessive humidity, first leave it for about 1 - 2 hours
„Acclimatize“ at room temperature to remove any moisture in the electrical
/ electronic parts that arises when the ambient temperature changes.
Do not switch the device on or off by plugging in or pulling out the power
cord from the AC socket.
Always connect the device to the mains power supply when using it nor-
mally, then switch on the main switch.
When you have finished using the device, turn off the main switch and then
pull the cord out of the mains socket.
Do not use the device if the main power switch does not work.
The device is under dangerous voltage when the power supply is connec-
ted.
There is a risk of electric shock!
Location/Installation
Only place the device on:
- Straight, firm and stable pads - for tables and furniture parts, suitable for
the location of audio / video equipment.
Always make sure that the place where you want to place the device has
enough space, mechanical strength and load capacity.
Do not install the equipment in the rooms (eg enclosed library cabinets,
built-in cabinets and cabinets, etc.) for which there is insufficient room for
space and ventilation.
Leave enough free space around the device to ensure the required air
circulation. It is recommended to keep min. 10 cm from all sides.
Do not cover the device in part. Do not place any objects and / or deco-
rative and other fabrics on the device, do not put and do not allow foreign
bodies to enter the ventilation holes and holes in the housing covers.
Do not cover the openings of the airflow covers. Air ventilation ensures
reliable and safe operation of the device.
There is a risk of electric shock!
There is a danger of fire!
Warning!
Do not expose the audio device (and the remote control if equipped) to:
- direct sunlight, heat generating equipment,
- vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- an aggressive external environment.