The attempt to pull the helmet off, by pulling on the
front then the rear of the helmet. If the helmet comes
off, increase strap tension and examine if the pads
being used are thick enough. The helmet should not
roll forward or backward excessively.It should not be
possible to remove the helmet without unfastening the
buckle.
Final check
The important thing to remember is that the helmet ts
snugly. If you can tilt it forward or backward you need
to tighten the strap adjustment.
It is important for the helmet to t snugly on your head
and must be fastened to provide maximum protection.
NOTE: All adjustments should be checked each
time the helmet is worn, making sure it ts snugly
at all times.
To Next Page
Loading...