MO 3200
• Do not turn on the appliance unless the lid is
properly placed.
• Do not insert tools or your fingers into the grinder,
as you may risk injury!
• The appliance is fitted with a circuit breaker that
prevents that the appliance can be operated without a
lid. Never try to bridge this circuit breaker!
• Wait until the blade has stopped moving after
grinding before you open the lid.
• The lid is not locked; prevent it from falling off.
DESCRIPTION
1. Motor part with grinding area
2. Transparent lid
3. On/Off switch
4. Blade
COMMISSIONING THE APPLIANCE
Clean the lid in a warm rinse before it is used for the first time. Wipe the grinding space carefully
with a damp cloth. Careful! The blades are very sharp.
USING THE APPLIANCE
Add the desired quantity of coffee beans up to a maximum of 30 g into the grinding space and
replace the lid.
ELECTRICAL CONNECTION
Only connect your appliance to a correctly installed safety plug 230 V~50 Hz.
SWITCHING ON AND OFF
− Keep the lid in position, holding it tight with one hand. Press the ON/OFF switch with your other
hand and the grinder starts to grind. Just release the button to stop it.
− Press the switch in intervals (i.e. press and then release etc.) for pulse operation.
To Next Page
