English
- 15 -
CHRONOS Programmable Thermostat User Manual
Timing setting
This menu allows the setting of a timing on the current operating mode, expressed in
hours and days.
For further information about timings, see the chapter “Timings: what they
are” on page 27).
To set a timing:
1. From the normal operation display, press for a long time the key
until the
symbol
starts flashing on field
2. Press for a short time the key
until the
symbol
flashes and press the key to
access the parameters modification.
3. The value of the timing currently set
flashes (00= no timing). Enter the timing
value (from 1 to 99) with the keys
and
and press the key to move to the
measurement unit change (hours and days).
4. The measurement unit starts flahing (hour
or day). Press the keys
and to
choose a timing in hours (hour) or days
(day).
or further information about timings, see the chapter “Timings: what they
re
on page 27
.
To Next Page
Loading...
