Need help?Do you have a question about the Orbit Fitness OHG3067 and is the answer not in the manual?
General| Product Type | Home Gym |
|---|---|
| Resistance Type | Weight Stack |
| Material | Steel Frame, Vinyl Upholstery |
| Exercises | Chest Press, Lat Pulldown, Leg Extension |
| Warranty | 1 Year Limited Warranty |
| Color | Black |
Connect the base frame and back base frame using specified hardware.
Install weight plates, selector shaft bushing, and pin onto guide tubes.
Attach main upright frame and top cross frame to the base and guide tubes.
Connect support frame and seat cushion frame to the main upright frame.
Assemble butterfly extension, arms, rollers, and tubes with hardware.
Attach leg extension frame, foam tubes, rollers, pulley brackets, and seats.
Route the upper cable through pulleys and connect to the selector shaft.
Install the butterfly cable connecting it to arms and pulleys.
Install pulleys for the lower cable and attach it to the leg extension frame.
Connect lat bar to upper cable and low bar/ankle strap to lower cable.
To Next Page