EN
11
synchronization. The unit will not respond to radio
signals until you reactivate the synchronization.
To enable auto-reception, press UP for 2 seconds.
SET OR CHANGE THE CLOCK
Auto-synchronization must be deactivated before you
manually set the clock. ( previous section)
1. Press and hold CLOCK for 2 seconds to enter
setting mode.
2. Select the 12/24-hour format, hour, minute,
year, date/month format, month, date, and
NOTE
Strong signal Weak signal No signal
For best results, place the unit away from
metal or electrical objects, and near a window with a
clear view to the sky.
TO DISABLE OR ENABLE AUTO-
SYNCHRONIZATION
Press DOWN for 2 seconds to disable the auto-
To Next Page
Loading...
