Use this quick reference as you set up and first begin to use your ThermoDECT telephone. For more detailed
instructions and troubleshooting tips, refer to the User Manual.
Clear/Phonebook/Mute
View the previous menu
Clear the last entered digit
Mute or un-mute the
microphone
View the phonebook
Down/Caller ID
Scroll through the
Caller ID menu
Decrease volume level
Review caller ID
information
Phone
Press to begin and end
a call
Up/Redial
Scroll through the
Caller ID menu
Increase volume level
Recall the last number
dialed
OK
Select or confirm a
menu option
Intercom
Make and terminate an
intercom (handset to
handset) call
Keypad
Dial the number for a call
Enter text for a phonebook
entry
Speakerphone
Turn the speakerphone on
or off
Caller ID / Phonebook tasks
Action Procedure Page
View caller ID information 8
Delete caller ID information Caller ID + + Delete + 9
Add caller to phonebook x 3 + name + + number + 9
Recall phonebook entry + to select entry + + 10
Delete / Edit phonebook entry x 2 + Delete or Edit + + entry + x 2 10
Action Procedure Page
Make a call + dial number 7
Answer / End a call 8
Redial + 7
Cancel / Clear 7
Return a missed call to view New Calls + 8
Call waiting + 20
Page handset(s) Press PAGE on the base 8
Set clock + Setup + x 3 + 22
date/month + + hour/minute +
Basic tasks
Action Procedure Page
Adjust volume 11
Mute / Unmute 8
Speakerphone 7
Intercom call + handset number 19
3-way call + handset number + x 20
2 seconds
Transfer call + handset number + 20
OR to cancel
Deactivate alarm Press PAGE on the base 22
Set alarm + Setup + + 22
Alarms + + to select
Alarm 1 or Alarm 2 + +
on + + hour/minute +
to select AM or PM +
ThermoDECT Quick Reference Guide
To set up the telephone:
1. Connect the base to the AC
power source and telephone wall
jack, as shown below.
2. (Optional) Attach the belt clip to
the handset.
3. Install the handset batteries,
matching (+) polarity to (+) and (-)
polarity to (-).
4. Allow the handset batteries to
charge before using.
Caller ID / Phonebook tasks
ENG